Description
Pro FM DAB+ Transmitter 400 Watt
DAB transmitter with a power of 400 Watts in a 3H rack housing.
And consists of EDABv2+ DAB+ digital radio exciter card and RF amplifier which is specially designed for digital radio.
Equipped with large 4×16 LCD display and LED bargraph meters! Amplifier section is controlled with our new control board.
Power is measured using our new directional couplings with True-RMS response, perfect for DAB+ The Large heavy-duty ball-bearing cooling fans to prevent excessive heat.
The Amplifier is equipped with SWR and temp protection and equipped with PC remote control (possible via USB, RS232 or Ethernet).
A robust transmitter made for 24/7/365 use. DAB+ amplifier is controlled and configured via web interface.
Audio is provided via ETI stream generated using ODR-DabMUX and input via Ethernet.
What parameters can I change and monitor via PC remote control?
- Power (100 steps)
- Alarms
- Temperature, output power and reflected power, voltage
- You can put the device in standby
- You can monitor current and voltages, two temperatures, output and input power and also reflected power
RF SECTION
– Output power 400 Watt DAB+ typical
– Output impedance 50 unbalanced, VSWR less than 2:1 for full output
– Output connector: 7/16 (400W)
– Frequency range 175-225MHz
– RF Harmonics: Requires DAB+ mask filter to be tuned for your channel to be compatible
– Monitoring Led: Power on, SWR/TEMP warning
– Audio input: Delivered via ETHERNET, a suitable program must be running on a network connected computer
GENERAL
– Mains voltage: 110- 240V 50/60Hz universal, works everywhere on this planet
– Ambient temperature: -5° to +45°C
– External dimensions 1000W (W x D x H) 19″ x depth (492mm) x height 3U (88mm)
– Physical weight 18 kg (400 W)
– Volumetric weight up to 25Kg
SPECIFICATIONS DAB+ exciter:
– Nominal transmission frequency: 176 … 239 Mhz
– Signal shoulder height: 54 dB (when TX power is 3 dBm).
– Software required: ODR-DabMUX is only required if you need to create an ETI stream yourself
– I/Q samples width: 18 bit
– Complex sample rate: 6144 kS/s.
– Input interface: 10/100 Mbit Ethernet
- Description
-
Pro FM DAB+ Transmitter 400 Watt
DAB transmitter with a power of 400 Watts in a 3H rack housing.
And consists of EDABv2+ DAB+ digital radio exciter card and RF amplifier which is specially designed for digital radio.
Equipped with large 4×16 LCD display and LED bargraph meters! Amplifier section is controlled with our new control board.
Power is measured using our new directional couplings with True-RMS response, perfect for DAB+ The Large heavy-duty ball-bearing cooling fans to prevent excessive heat.
The Amplifier is equipped with SWR and temp protection and equipped with PC remote control (possible via USB, RS232 or Ethernet).
A robust transmitter made for 24/7/365 use. DAB+ amplifier is controlled and configured via web interface.
Audio is provided via ETI stream generated using ODR-DabMUX and input via Ethernet.What parameters can I change and monitor via PC remote control?
- Power (100 steps)
- Alarms
- Temperature, output power and reflected power, voltage
- You can put the device in standby
- You can monitor current and voltages, two temperatures, output and input power and also reflected power
- Specifications
-
RF SECTION
– Output power 400 Watt DAB+ typical
– Output impedance 50 unbalanced, VSWR less than 2:1 for full output
– Output connector: 7/16 (400W)
– Frequency range 175-225MHz
– RF Harmonics: Requires DAB+ mask filter to be tuned for your channel to be compatible
– Monitoring Led: Power on, SWR/TEMP warning
– Audio input: Delivered via ETHERNET, a suitable program must be running on a network connected computer
GENERAL
– Mains voltage: 110- 240V 50/60Hz universal, works everywhere on this planet
– Ambient temperature: -5° to +45°C
– External dimensions 1000W (W x D x H) 19″ x depth (492mm) x height 3U (88mm)
– Physical weight 18 kg (400 W)
– Volumetric weight up to 25Kg
SPECIFICATIONS DAB+ exciter:
– Nominal transmission frequency: 176 … 239 Mhz
– Signal shoulder height: 54 dB (when TX power is 3 dBm).
– Software required: ODR-DabMUX is only required if you need to create an ETI stream yourself
– I/Q samples width: 18 bit
– Complex sample rate: 6144 kS/s.
– Input interface: 10/100 Mbit Ethernet
